Who the customer is
A Tier-1 automotive exhaust supplier based in Germany builds complete muffler and catalyst assemblies for passenger car OEMs. Its engineers were looking for a second source for the knitted wire mesh used as an internal support layer and thermal barrier inside the muffler shell.
The problem with the existing part
The previous supplier delivered mesh that varied in width from coil to coil. In automated assembly the mesh is fed into a wrapping station, so a width variance of more than half a millimetre caused jamming, rejected wraps and unplanned line stops. The material also had to survive continuous vibration and a harsh condensate environment without shedding loose wire ends that could damage downstream components.
Specification agreed
| Item | Requirement |
|---|---|
| Material | Copper and stainless steel 304, supplied separately |
| Mesh width | 35 mm, tolerance ±0.5 mm |
| Wire diameter | Selected to suit each muffler variant |
| Surface | Clean, oil-free, no loose ends |
| Form | Continuous roll, wound on cardboard cores |
| Certification | ISO 9001:2015 |
| Packing | Waterproof paper, plastic cloth, wooden case |
What we did differently
- Width locked at slitting. Coils are slit on a dedicated line and measured every 50 metres, with the measured value written on the coil label so the customer can verify against its incoming inspection record.
- End treatment. Cut ends are secured during winding, which removes the loose filament problem that had caused warranty claims with the previous part.
- Two materials, one shipment. Copper and SS304 coils are produced in the same batch cycle and shipped together, so the assembly plant receives matched lots instead of waiting for a second delivery.
- Free samples before tooling. Sample coils were supplied at no charge so the customer could run them on the actual wrapping machine before committing to volume.
Commercial outcome
The customer qualified the material over a six-month trial covering three muffler variants. Anping Zhaotong then became a running second source with scheduled releases every month:
- Wrap rejection caused by width variance fell to below 0.5 % of parts in the trial period.
- No loose-end complaints were recorded during the qualification run.
- Standard lead time of around 7–10 days after payment allowed the customer to hold a lean buffer instead of six weeks of safety stock.
- Supply capability of up to 999 pieces per day covers peak model-year ramp-ups without a separate expediting fee.
Notes for automotive buyers
Automotive mesh projects live or die on two numbers: width tolerance and end condition. If you are specifying knitted wire mesh for muffler packing, catalyst support or heat shielding, put both on the drawing, and ask for a coil label carrying the measured width. It turns incoming inspection from a guess into a check.
![]()



