Customer and application
A Brazilian manufacturer of refrigeration compressors and air-conditioning condensing units needed to isolate vibration between the compressor foot and the chassis. The existing rubber mounts worked at low temperature but hardened and cracked in high-ambient installations, and in a few field cases the rubber failed completely, leaving the compressor sitting on the base plate.
The engineering team wanted a metallic cushion that would keep its elastic behaviour from −40 °C to well above 200 °C, resist oil and refrigerant contact, and be dimensionally repeatable enough for automated assembly.
The material chosen
We proposed round knitted wire mesh cushions made from 0.018 mm stainless steel wire. Very fine wire is what gives the cushion its soft, progressive spring curve: under light load the loops deform easily, and as load increases more loops come into contact, so stiffness rises gradually instead of bottoming out. That behaviour is exactly what a compressor mount needs, because it must absorb both steady weight and high-frequency vibration.
| Parameter | Specification |
|---|---|
| Form | Round knitted wire mesh cushion, cut to diameter |
| Wire diameter | 0.018 mm to 0.3 mm, selected per load case |
| Material | Stainless steel, imported 304N grade wire |
| Function | Support vibration and shock loading |
| Temperature range | Stable across high and low ambient conditions |
| Certification | ISO 9001:2015 |
| Sample | Free samples for bench and road testing |
| Delivery | 7–15 days, production capacity 10,000 pieces per day |
Development path
- Load case definition. The customer shared compressor mass, centre of gravity and target natural frequency; we translated that into a cushion density and diameter proposal.
- Sample iteration. Three densities were supplied free of charge. The customer ran them through a shaker test and selected the middle density as the best compromise between isolation and deflection.
- Assembly trial. Cushions were trialled on the production line to confirm they stayed in position during automated fastening.
- Series release and second programme. After the first compressor platform was released, the same cushion was adapted for a condensing unit variant.
Results
- Structure-borne vibration transmitted to the chassis was reduced enough to bring the unit inside the customer's noise specification without adding mass.
- No field failures attributable to the mount were reported, replacing the rubber cracking issue entirely.
- Repeatable dimensions removed a manual positioning step from the assembly line.
- The cushion can be reused after cleaning, which helped in service and refurbishment work.
Where else this works
The same knitted wire mesh damping principle is used in railway equipment, industrial pumps, marine engines and precision instruments — anywhere rubber fails because of temperature, oil or load. The key specification is the wire diameter and the resulting load-deflection curve, so always start from the load case rather than from a standard part number.
![]()



