Knitted wire mesh looks like a simple product and behaves like a precision one. A half millimetre of width variance jams an automated wrapping station; a wire diameter outside specification changes the load-deflection curve of a damping cushion; a stray filament end becomes a warranty claim inside an exhaust system.
Anping Zhaotong Metal Netting Co., Ltd operates under ISO 9001:2015, and the practical meaning of that certificate is that every batch is checked at the points where variation is introduced, not only at the end of the line.
| Stage | What is checked |
|---|---|
| Incoming wire | Material grade, wire diameter, surface condition, supplier certificate |
| Knitting | Mesh count, loop uniformity, wire diameter in process |
| Crimping | Profile height and pitch for corrugated demister mesh |
| Slitting and cutting | Width, tolerance against drawing, clean cut ends |
| Compression | Thickness, density and weight per square metre |
| Final packing | Quantity, labelling, moisture protection, wooden case integrity |
Three of the most common failure modes in knitted mesh procurement are traceable to documentation gaps rather than manufacturing defects: material that cannot be traced to a heat number, width that was never measured, and packing that lets moisture reach the mesh during a six-week sea voyage.
The standard export packing at Anping Zhaotong is waterproof paper inside, plastic cloth outside, then a wooden case. Customised packing is available where the customer's line needs coils presented in a particular orientation or length.
ISO 9001:2015 does not remove variation. What it does is make variation visible early enough to act on it. When a knitting line drifts, the in-process mesh count check catches it before crimping; when a slitting blade wears, the measured width on the label exposes it before the coil ships.
The company produces 147 knitted wire mesh product lines across 0.018 mm to 0.5 mm wire, and customers include filtration OEMs, automotive Tier-1 suppliers, refinery contractors and electronics enclosure makers. Each has a different definition of critical to quality, and the certificate pack is written to match that definition rather than to a generic template.
![]()
Contact Person: Mrs. Aimee
Tel: +86 13103181658
Fax: 86-0318-7528518