Anping Zhaotong Metal Netting Co., Ltd is promoting its copper knitted wire mesh and stainless shielding tape range to enclosure and cabinet manufacturers, where knitted mesh serves as the conductive gasket along door seams, panel joints and cable entries.
The interlocking loops of a knitted mesh create hundreds of independent contact points along a seam. When a door closes, the loops compress and form a continuous conductive path that reflects and absorbs radiated energy before it escapes through the gap. Unlike foil tapes, the structure retains springback after repeated compression cycles; unlike fabric-over-foam, it does not rely on a polymer core that can degrade.
| Product | Range |
|---|---|
| Copper knitted mesh | Width 2.5–60 cm, roll length 1–30 m |
| Shielding tape | SS304 or SS316 knitted mesh tape, 25 mm width |
| Colour | Natural copper yellow, customised on request |
| Wire diameter | Made to drawing |
| Surface | Clean, bright, free of oil |
| Certification | ISO 9001:2015 |
| Capacity | Up to 5,000 pieces per day |
| Samples | Free sample coils for bench testing |
The same material is used in telecom racks, EV battery housings, industrial drives, medical equipment enclosures and cable shielding. In each case the failure mode is identical: an untreated seam acts as a slot antenna at the frequency of interest, and the gasket's job is to close that slot with a conductive, compliant, recoverable material.
Copper oxidises, and an oxidised gasket measures worse than a bright one. Mesh and tape are therefore packed with an inner plastic layer that limits air exchange inside the wooden case, and cases are kept sealed until the customer opens them on the line. For long sea voyages or humid destinations, an additional desiccant pack is added on request.
Copper mesh and shielding tape ship in about 7 to 10 days after payment, packed in wooden cases with plastic inner protection to keep the copper bright during sea freight. Free samples are available for qualified projects, and customised packing is available where the assembly line needs a particular presentation.
![]()
Contact Person: Mrs. Aimee
Tel: +86 13103181658
Fax: 86-0318-7528518